Jura W8 - Machine cleaning

Is your Jura W8 machine prompting for a cleaning? Or do you want to clean it before moving?

Good to Know
Your Jura machine requests cleaning after 180 coffee preparations or 80 rinses at startup. You can either wait for the machine to prompt a cleaning or force a cleaning by pressing the "P" button (programming).
Javry recommends using Jura or Solute cleaning tablets to clean your machine. Using other products may damage your machine.
It is important not to interrupt the cleaning program once started, as this could also damage your machine or even render it unusable.
A cleaning cycle lasts about 20 minutes, but it will only take a few minutes of your time (the machine cleans itself).

Available Resources
We have provided several resources to assist you in cleaning your coffee machine:

• The PDF user manual: go to page 23 of the user manual.
• Visual guide.
• Step-by-step instructions.

Step-by-Step Instructions
This guide describes, with images, how to clean your coffee machine:

Steps in Text

1. Start facing the home screen of your Jura W8.
2. Press the button in the bottom right for three seconds.
3. The menu appears: Press the button in the bottom left.
4. The duration and tips will display: press "Start."
5. The message 'Empty Grounds' appears.
6. Remove the two trays: drip tray and grounds container.
7. Empty and replace the trays.
8. Place a container under the spouts.
9. 'Cleaning' appears: press "Next."
10. The screen announces that the cleaning will start.
11. The screen displays 'Add a Tablet.'
12. Open the ground coffee hatch at the back of the machine.
13. Press "Next."
14. The cleaning resumes.
15. 'Empty Grounds' appears: repeat actions 6 & 7.
16. The cleaning is complete: the home screen appears again.

Any Questions?
If you're looking for something and haven't found the answer here, we are an official Jura retailer, and our team of experts is at your disposal. Send us an email, and we will get back to you promptly!