Jura X10 - Cleaning
Written By Damien Ruelens, last update onYour Jura X10 machine needs cleaning? Or do you want to clean it before moving?
Good to know
- Your Jura machine requires cleaning after 180 coffees (preparations) or 80 rinses at startup.
- You can either wait for the machine to prompt cleaning or start it manually by pressing the "P" (programming) button.
- Javry recommends using Jura or Solute cleaning tablets for this process. Using other products could damage your machine.
- It is important not to interrupt the cleaning program once it has started, as this could also damage your machine or make it unusable.
Cleaning takes about 20 minutes, but it only requires a few minutes of your time (the machine cleans itself).
Available Resources
- The user manual in PDF: go to page 36.
- The image guide.
- The text guide.
We have several resources available to help you clean your coffee machine:
The guide in pictures
This guide shows how to clean your coffee machine step by step using images.
Steps: Cleaning a Jura X10
Once your machine displays "Clean":
- The machine screen will indicate in red that cleaning is required.
- Press the red text at the top of the screen.
- The cleaning start screen will appear.
- Press the red square in the center.
- The screen will display the duration and advice.
- Press 'Start' at the top right.
- The message 'Empty coffee grounds container' will appear.
- Remove the drip tray and grounds container.
- Empty and replace the trays.
- Place a container under the coffee spouts.
- Press 'Next' at the top right.
- The screen will announce the cleaning process will begin.
- The message 'Add tablet' will appear.
- Take a Jura or Solute cleaning tablet.
- Open the ground coffee chute at the back of the machine.
- Add the tablet and close the chute.
- Press 'Next' at the top right.
- Cleaning will resume.
- 'Empty coffee grounds' will appear: repeat steps 9&10.
- Empty the containers under the spouts.
- Cleaning is complete, and the home screen will reappear.